TMB3SL41Q Is Huawei OptiXtrans E6600 4 Port SDH Board 03050FRN
Huawei OptiXtrans E6600 4 Port SDH Board 03050FRN TMB3SL41Q Overview
TMB3SL41Q: 4*STM-4/4*STM-1 optical interface board
The TMB3SL41Q optical interface board is a SDH board, which can be used on the equipment to receive and transmit four STM-4/STM-1 optical signals.
The board converts the received optical signals into electrical signals and sends the electrical signals to the cross-connect side. In addition, the board converts the electrical signals from the cross-connect side into optical signals and transmits the optical signals.
The board newly supports the TM65UXCL board of the E6616X.
The board newly supports the optical modules eSFP,1310nm(Tx)/1490nm(Rx),1.25Gb/s,-2dBm,3dBm,-23dBm,LC,SM,40km and eSFP,1490nm(Tx)/1310nm(Rx),1.25Gb/s,-2dBm,3dBm,-23dBm,LC,SM,40km.
The board newly supports the TMK5XCS board of the E6616.
An SDH board is added to receive and transmit four STM-4/STM-1 optical signals.
Functions and Features of the TMB3SL41Q Board
Function and Feature |
Description |
Basic function |
|
Service processing |
VC-12, VC-3, VC-4, VC-4-4c |
Overhead processing |
|
In-service CPLD loading |
Supported |
Port specifications |
|
SDH SNCP |
Supported |
Linear MSP |
Supported |
Ring MSP |
Supports two-fiber bidirectional ring MSP. |
SDH ASON |
Supported NOTE: Only supported when the TM65UXCL/TMK5UXCME/TMK5XCS board is used. |
Pointer processing |
Processes AU pointers. |
Overtemperature protection |
Supported. If the temperature of a board exceeds the upper threshold and services are affected, the board will automatically reset the key chips to prevent a board damage. |
ALS |
Supported (comply with ITU-T G.664) |
Line clock source |
Supports four channels of SDH line clock source. |
Physical clock |
Supports SDH clock synchronization. |
Outband DCN |
Supported NOTE: For details about the DCN types supported by the board, see "Feature Description - Outband DCN - Introduction to DCN - DCN Communication Channel - Comparison Between OSC and ESC". |
Bit Error Threshold-Crossing/Degradation Threshold Setting |
Supported |
Reset |
Supports warm reset and cold reset, the warm reset does not affect services. |
Manufacturer information querying |
Supported |
In-service FPGA loading |
Supported |
Hot swapping |
Supported |
Channel loopback |
|
Port loopback |
Supports inloops and outloops on ports. |
2M ASON |
Supported NOTE: Only supported when the TM65UXCL/TMK5UXCME/TMK5XCS board is used. |
Alarm and performance event monitoring |
Provides various alarms and performance events, facilitating equipment management and maintenance. |