Huawei OptiX OSN 8800 OTN Line Board TN54NS3T03 03030LWQ

Basic function

NS3 converts signals as follows:

• TN11NS3:
  • 4xODU2<->1xOTU3/OTU3e
  • 4xODU2e<->1xOTU3e
• TN52NS3:
  • 32xODU0/16xODU1/4xODU2<->1xOTU3/OTU3e
  • 4xODU2e<->1xOTU3e
• TN54NS3/TN55NS3:
  • 32xODU0/16xODU1/4xODU2<->1xOTU3/OTU3e
  • 4xODU2e<->1xOTU3e
  • 1xODU3<->1xOTU3
• TN56NS3:
  • 32xODU0/32xODUflex/16xODU1/4xODU2<->1xOTU3/OTU3e
  • 4xODU2e<->1xOTU3e
  • 1xODU3<->1xOTU3
  • 16xSTM-16/4xSTM-64<->1xOTU3/OTU3e

The TN52NS3/TN54NS3/TN55NS3 board supports hybrid transmission of ODU0/ODU1/ODU2/ODU2e signals. The TN56NS3 board supports hybrid transmission of ODU0/ODU1/ODU2/ODU2e/ODUflex/VC-4 signals. When the mixed signals contain an ODU2e signal, they must be mapped into an OTU3e signal.

The TN11NS3/TN52NS3/TN54NS3 board supports dispersion compensation for signals received on the WDM side.

Cross-connect capabilities

Supports cross-connections with cross-connect boards.

OptiX OSN 8800:

• TN52NS3: 32xODU0/16xODU1/4xODU2/4xODU2e
• TN54NS3/TN55NS3: 32xODU0/16xODU1/4xODU2/4xODU2e/1xODU3

TN56NS3: 32xODU0/32xODUflex/16xODU1/4xODU2/4xODU2e/1xODU3/256xVC-4

NOTE:

When the TN56NS3 board is installed in an OptiX OSN 8800 T64 subrack, the board supports a maximum of 128 VC-4 services. This limit does not apply when the board is installed in an OptiX OSN 8800 T32/T16 subrack.

OptiX OSN 6800:

• TN11NS3: 4xODU2/4xODU2e
• TN52NS3: 16xODU1/4xODU2/4xODU2e

OTN function

• Supports the OTU3/OTU3e interface on the WDM side.
• Supports the OTN frame format and overhead processing by referring to the ITU-T G.709.
• OTU3 layer: supports the SM function.
• ODUk (k=0, 1, 2, 3, flex) layer: supports the PM and TCM function, and PM and TCM non-intrusive monitoring functions.

NOTE:

Only the TN56NS3 board supports TCM and TCM non-intrusive monitoring of the ODU0 and ODUflex layer.

SDH service processing

Supports the VC-12 services, VC-3 services, VC-4 services, VC-4-4c concatenation services, VC-4-16c concatenation services, and VC-4-64c concatenation services.

SDH overhead processing

Only the TN56NS3 board supports the following functions:

• Processes the section overheads of STM-16/STM-64 signals.
• Supports the transparent transmission and termination of path overheads.
• Supports the setting and query of the J0, J1, and C2 bytes.

NOTE:

The TN56NS3 board supports D4–D12 overhead processing. It does not support D1–D3 overhead processing.

WDM specification

Supports ITU-T G.694.1-compliant DWDM specifications.

Tunable wavelength function

Supports tunable wavelength optical modules that provide for:

• 40 wavelengths tunable in the C band with 100 GHz channel spacing
• 80 wavelengths tunable in the C band with 50 GHz channel spacing

ESC function

Supported

PRBS test function

TN52NS3/TN54NS3/TN55NS3/TN56NS3 supports the PRBS function on the WDM side.

LPT function

Not supported

FEC coding

TN11NS3/TN52NS3:

• Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
• Supports ITU-T G.975.1-compliant advanced forward error correction (AFEC) on the WDM side.

TN54NS3:

• Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
• Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side.

TN55NS3/TN56NS3:

• Supports HFEC.

NOTE:

Boards that use different FEC modes cannot interconnect with each other.

Alarms and performance events monitoring

• Monitors BIP8 bytes (Poisson mode or Bursty mode) to help locate line failures.
• Monitors parameters such as the bias current, temperature, and optical power of the laser.
• Monitors OTN alarms and performance events.

• Supports CD and PMD performance monitoring.
• Monitors B1 bytes to help locate faults.
• Monitors B2 bytes to help locate faults.

NOTE:

Only the TN54NS3 supports Poisson mode.

Only the TN55NS3/TN56NS3 board supports CD and PMD performance monitoring.

Only the TN56NS3 board supports B1/B2 byte monitoring.

Regeneration board

• The WDM-side signals of the TN11NS3/TN52NS3 board can be regenerated by a TN12LSXLR board.
• The WDM-side signals of the TN54NS3 board can be regenerated using another TN54NS3 board.
• The WDM-side signals of the TN55NS3/TN56NS3 board can be regenerated using another TN55NS3/TN56NS3 board.

ALS function

Not supported

Test frame

Not supported

IEEE 1588v2

The TN54NS3 board supports BC and OC mode, do not support TC and TC+OC mode.

Physical clock (OTN)

The TN54NS3 board supports this feature only when ODU0, ODU1 or ODU2/ODU2e signals are cross-connected from the backplane.

Optical-layer ASON

Supported

Electrical-layer ASON (OTN)

Supported by the TN52NS3, TN54NS3, TN55NS3, and TN56NS3.

Electrical-layer ASON (SDH)

Supported only by the TN56NS3 board.

NOTE:

When being installed in a T16 subrack, the board does not support SDH ASON.

Protection scheme

OTN protection

• Supports ODUk SNCP.
• Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
• Supports ODUk SPRing protection.
• Supports tributary SNCP protection.
• Supports OWSP protection.

SDH protection

• SNCP
• SNCTP
• LMSP
• MSP ring

NOTE:

Only TN52NS3 supports OWSP protection.

When the grooming granularity is ODUflex, ODUk SPRing and tributary SNCP protection types are not supported.